The Callander (Auchenlaich) moraine: A new site report for the Western Highland Boundary block of the Quaternary of Scotland Geological Conservation Review (GCR)     

John Lowe  Vanessa Brazier 《Proceedings of the Geologists' Association. Geologists' Association》2021,132(1):24-33

  相似文献   

红河断裂活动对琼东南盆地环崖南凹陷构造-沉积-成藏的影响     

王真真  王世朝  李安琪  李明  李夏露  陈奎 《海相油气地质》2021,(1)

琼东南盆地西部环崖南凹陷的油气勘探亟需寻找接替领域。针对勘探研究中存在的3个地质问题,利用丰富的钻井和地震资料对红河断裂活动特征及其对环崖南凹陷构造-沉积-成藏的影响开展深入分析。认为红河断裂的走滑活动通过F1断层向琼东南盆地西部传递剪切应力,其演化与环崖南凹陷的构造-沉积作用具有良好的时空耦合关系,并控制了环崖南凹陷的油气运移。晚渐新世,红河断裂左行走滑活动,通过F1断层在琼东南盆地西部诱导产生EW向挤压应力和SN向拉张应力,加剧了盆地西部的南北向快速拉张裂陷,形成了崖北凹陷和崖南凹陷两个沉积中心。中中新世—晚中新世,红河断裂处于平静期,受区域右旋张扭应力控制及海南岛物源减少的影响,环崖南凹陷呈现局部隆升,碳酸盐台地发育,梅山组一段及黄流组二段大范围缺失。上新世至今,红河断裂右行走滑活动,通过F1断层在琼东南盆地西部诱导产生SN向挤压应力和EW向拉张应力,对盆地西部的拉张具有约束作用,并造成NEE、NE走向断层受挤压作用而处于封闭状态,NW走向断层受张扭应力作用而处于开启状态。上新世为盆地生排烃高峰期,NW走向断层可有效输导油气,而NEE、NE走向断层的油气输导能力较差,这合理解释了已钻构造的油气发现情况。环崖南凹陷下一步油气勘探应重点围绕NW走向断裂带展开。  相似文献   

Centrifuge modelling of landslides and landslide hazard mitigation: A review     

《地学前缘(英文版)》2023,14(1):101493

Landslides are serious geohazards that occur under a variety of climatic conditions and can cause many casualties and significant economic losses. Centrifuge modelling, as a representative type of physical modelling, provides a realistic simulation of the stress level in a small-scale model and has been applied over the last 50 years to develop a better understanding of landslides. With recent developments in this technology, the application of centrifuge modelling in landslide science has significantly increased. Here, we present an overview of physical models that can capture landslide processes during centrifuge modelling. This review focuses on (i) the experimental principles and considerations, (ii) landslide models subjected to various triggering factors, including centrifugal acceleration, rainfall, earthquakes, water level changes, thawing permafrost, excavation, external loading and miscellaneous conditions, and (iii) different methods for mitigating landslides modelled in centrifuge, such as the application of nails, piles, geotextiles, vegetation, etc. The behaviors of all the centrifuge models are discussed, with emphasis on the deformation and failure mechanisms and experimental techniques. Based on this review, we provide a best-practice methodology for preparing a centrifuge landslide test and propose further efforts in terms of the seven aspects of model materials, testing design and equipment, measurement methods, scaling laws, full-scale test applications, landslide early warning, and 3D modelling to better understand the complex behaviour of landslides.  相似文献   

Influence of underground space development mode on the groundwater flow field in Xiong’an new area          下载免费PDF全文

Yi-hang Gao  Jun-hui Shen  Lin Chen  Xiao Li  Shuang Jin  Zhen Ma  Qing-hua Meng 《地下水科学与工程》2023,11(1):68-80

The degree and scale of underground space development are growing with the continuous advancement of urbanization in China. The lack of research on the change of the groundwater flow field before and after the development of underground space has led to various problems in the process of underground space development and operation. This paper took the key development zone of the Xiong’an New Area as the study area, and used the Groundwater modeling system software (GMS) to analyse the influence on the groundwater flow field under the point, line, and surface development modes. The main results showed that the underground space development would lead to the expansion and deepening of the cone of depression in the aquifer. The groundwater level on the upstream face of the underground structure would rise, while the water level on the downstream face would drop. The “line” concurrent development has the least impact on the groundwater flow field, and the maximum rise of water level on the upstream side of the underground structure is expected to be approximately 3.05 m. The “surface” development has the greatest impact on the groundwater flow field, and the maximum rise of water level is expected to be 7.17 m.  相似文献   

航空重力测量厄特弗斯改正公式注记   总被引：1，自引：1，他引：0  

黄谟涛  宁津生  欧阳永忠  陆秀平  翟国君  邓凯亮  吴太旗 《测绘学报》2015,44(1):6-12

针对当前国内外机构和学者在使用航空重力测量厄特弗斯改正公式中存在的不一致性问题,详细分析了不同时期、不同形式改正计算公式的来源及其相互关系,并比较了它们在数值上的差异,指出我国作业部门目前使用近似公式存在的误用问题和统一使用严密公式的必要性。  相似文献   

利用GOCE模拟观测反演重力场的Torus法   总被引：1，自引：1，他引：0  

刘焕玲  汉江  徐新禹  朱广彬 《测绘学报》2015,44(9):965-972

在介绍Torus方法反演地球重力场模型的基本原理和方法的基础上,基于圆环面上均匀分布的卫星引力梯度模拟观测值解算了200阶次的地球重力场模型,在无误差情况下,Torus方法解算模型的阶误差RMS小于10-16,验证了该方法的严密性。利用61dGOCE卫星轨道上无误差的模拟引力梯度观测值解算了200阶次的地球重力场模型,分析了格网化误差、极空白对解算精度的影响,迭代3次后,在不考虑低次系数情况下,模型的大地水准面阶误差和累积误差均较小,最大值仅为0.022mm和0.099mm。在沿轨卫星引力梯度模拟数据中加入5mE/Hz1/2的白噪声,基于Torus方法和空域最小二乘法解算了200阶次的地球重力场模型,Torus方法的精度略低于空域最小二乘法的精度,在不考虑低次项的情况下,两种方法解算模型的大地水准面阶误差最大值分别为1.58cm和1.45cm,累积误差最大值分别为6.37cm和5.55cm。但由于采用了二维快速傅里叶技术和块对角最小二乘法,极大地提高了计算效率。本文数值结果说明Torus方法是一种独立有效的方法,可用于GOCE任务海量卫星引力梯度观测值反演重力场的快速解算。  相似文献   

PDCA循环法用于专业硕士产教融合培养模式研究     

史建青  董春来  冯娜娜  王信祥 《测绘通报》2021,(3):152-155

为满足新时代对卓越工程技术人才的需求,本文在分析专业硕士培养现状基础上,从人才培养方案入手,提出了PDCA理念用于产教深度融合培养模式,讨论了产教深度融合培养的目标制定、计划落实、课程体系开发、导师团队优化及实践基地的质量保障建设等方面的模式与对策,论述了专业硕士研究生培养的质量监控体系,总结出教育教学各环节的计划、执行、考查、处理的持续改进和提高的螺旋式上升过程,为专业硕士高水平培养与管理提供参考与借鉴。  相似文献   

中国区域DMSP-OLS与NPP-VIIRS夜间灯光影像校正     

关靖云  李东  王亚菲  王新芸 《测绘通报》2021,(9):1-8

本文基于对传统不变目标区域校正法的改进,选择4期辐射定标参考影像对DMSP-OLS影像进行了饱和校正与时间序列连续性校正。通过阈值法去除了NPP-VIIRS影像的背景噪声及异常值,利用对数变换压缩了其灯光辐射值的动态范围,使其亮度分布更接近于DMSP-OLS数据。利用BiDoseResp函数模型对NPP-VIIRS影像进行了一致性校正,获得了1992-2019年长时间序列夜间灯光影像。从定性、定量及校正影像与社会经济参量的相关性方面对校正结果进行了精度验证。结果表明,改进后的校正方法改善了DMSP-OLS影像饱和严重的现象,使其获得了长时间序列纵向可比性。BiDoseResp函数模型可以很好地拟合DMSP-OLS和对数变换后的NPP-VIIRS之间的回归。校正后的长时间序列灯光影像数据与社会经济参量高度契合。校正结果对推广长时间序列夜间灯光影像的广泛应用、深化长时间序列科学问题的研究具有重要价值。  相似文献   

On the linear elastic responses of the 2D bonded discrete element model     

Gao-Feng Zhao  Qiuyue Yin  Adrian R. Russell  Yingchun Li  Wei Wu  Qin Li 《国际地质力学数值与分析法杂志》2019,43(1):166-182

The bonded discrete element model (DEM) is a numerical tool that is becoming widely used when studying fracturing, fragmentation, and failure of solids in various disciplines. However, its abilities to solve elastic problems are usually overlooked. In this work, the main features of the 2D bonded DEM which influence Poisson's ratio and Young's modulus, and accuracy when solving elastic boundary value problems, are investigated. Outputs of numerical simulations using the 2D bonded DEM, the finite element method, a hyper elasticity analysis, and the distinct lattice spring model (DLSM) are compared in the investigation. It is shown that a shear interaction (local) factor and a geometric (global) factor are two essential elements for the 2D bonded DEM to reproduce a full range of Poisson's ratios. It is also found that the 2D bonded DEM might be unable to reproduce the correct displacements for elastic boundary value problems when the represented Poisson's ratio is close to 0.5 or the long-range interaction is considered. In addition, an analytical relationship between the shear stiffness ratio and the Poisson's ratio, derived from a hyper elasticity analysis and applicable to discontinuum-based models, provides good agreement with outputs from the 2D bonded DEM and DLSM. Finally, it is shown that the selection of elastic parameters used the 2D bonded DEM has a significant effect on fracturing and fragment patterns of solids.  相似文献   

Formation control of multiple underwater vehicles subject to communication faults and uncertainties     

《Applied Ocean Research》2019

This paper proposes a novel approach to analyze and design the formation keeping control protocols for multiple underwater vehicles in the presence of communication faults and possible uncertainties. First, we formulate the considered vehicle model as the Port-controlled Hamiltonian form, and introduce the spring-damping system based formation control. Next, the dynamics of multiple underwater vehicles under uncertain relative information is reformulated as a network of Lur’e systems. Moreover, the agents under unknown disturbances generated by an external system are considered, where the internal model is applied to tackle the uncertainties, which still can be regulated as the Lur’e systems. In each case, the formation control is derived from solving LMI problems. Finally, a numerical example is introduced to illustrate the effectiveness of the proposed theoretical approach.  相似文献